Skip to content

How To Get Pure Water For Drinking

The purifying of water is achieved in two ways: first by boiling and then by filtering it. In both cases, a filter is used to let the impurities of water out. The impurities may be inorganic minerals like iron or manganese, organic compounds such as hydrogen, oxygen or carbon dioxide or even chemicals like sodium, chloride or bromine. Basically, in both the processes of boiling and filtering, the essential solution, i.e. H20, remains in the final product, which is purified water.

So, basically, what we want from cooking water is that it should be free from minerals and that is why the boiling method is used. But, while doing this, we should be careful that we do not cook the cooking water raw. Therefore, we need to use a condensing cooker to achieve the same result.

However, there are some steps to follow while using these cookers. First of all, you should decide what type of pot you are going to use. For instance, if you want to boil the water for your pasta, you would need to use a smaller pot. If the main purpose of your cooking is to cook your meat in, a bigger pot is required.

You should also check the availability of various minerals in your area. For instance, calcium and magnesium are present in well water, but sometimes they are not available at all. Therefore, you should use well water for cooking purpose only if the availability is good. There are some additional tips that you should follow for cooking well water for drinking purposes. They include:

Use pure boiled water for washing the utensils after using them. This will help you in removing all kinds of impurities present in it, including the ones that can harm you. For removing copper present in the water, you may consider using chlorinated water. However, in many areas, such as those located near the coast, chlorinated and distilled water is not available. Therefore, this method cannot be used to remove copper contaminants from the water.

When using boiling water for washing utensils and cooking food, you should ensure that it is free from microbes and microorganisms. In addition to this, you should also look out for metallic particles present in it. These metallic particles can be removed by means of reverse osmosis or other methods, but unfortunately they cannot be removed by boiling water.

If you think that this process is expensive, you can take help of various online websites. You can also make use of tap water for cooking purpose at affordable rates by installing a water filter. These filters are known as point-of-entry units. On the other hand, some individuals choose to have a point-of-use unit installed at their homes. The filtering system of these devices is known as countertop units.

With all these options available, there is no doubt that one minute boil is a better option than boiling water. Not only this, but nowadays the process has become very economical. The best part is that the whole process does not consume any natural gas or electricity. All you need to have is an electric kettle. Therefore, you do not need to use any special apparatus in order to boil water safely and at an affordable rate.

However, if you want to use this method, it is vital to keep a few things in mind. First of all, if you want to use the boiling method, you should never wait more than twenty to thirty seconds when you put the kettle on to boil the water. This is because the boiling water might scorch your eyes and mouth. Secondly, keep in mind that you should always keep the kettle away from the open flame. In order to boil safe bottled water, you should always use a lid and do not allow it to touch the fire.

Therefore, one cannot say that pure water is completely free from minerals. The presence of minerals in the water makes it unfit for drinking purposes. So, what you need is a purifier that can remove all the minerals, irrespective of its type. If you opt for mineral water purifiers, then there are certain things that you should look for.

There are two types of purified water supply systems – the point of use and the point of entry. The point of use purifiers remove contaminants at the source and hence do not have to deal with contaminated sediments in the water supply. On the other hand, the point of entry purifiers are used at a specific location such as in the house or at the work place. These types of purifiers require frequent cleanings, which may be harmful for your health. Thus, it can be concluded that drinking purified water is absolutely safe, provided you get it from the right place.

Leave a Reply

Your email address will not be published.